Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Denver, CO
Chimney repair in Denver starts with the house you live in. A 1920s brick bungalow in Park Hill and a 1980s tract home off the 80239 corridor fail in completely different ways, and the mile-high climate pushes both harder than most owners expect. The semi-arid freeze-thaw cycle cracks mortar crowns, spalls brick and loosens flue tiles, while drought-season burn bans mean the firebox sits idle for months and then gets worked hard when the first real cold snap lands. We sweep, we repair, and we reline: when our technicians find cracked tile or a failed crown, the fix happens on the same visit rather than becoming a report you have to shop around. Call (833) 749-6226 for a free estimate.
Why Denver Homes Are Different
Denver’s housing stock splits the work into two very different jobs. The core neighborhoods – Congress Park, Park Hill, and the brick Tudors and bungalows around 80206 and 80207 – carry original masonry chimneys built before 1940, with clay tile liners that have had eight decades of heating cycles. East along the 80239 and 80230 corridors, the housing shifts to 1970s through 1990s tract homes with factory-built metal fireplaces, which need a different cleaning method and different replacement parts entirely.
The climate adds a second layer. Rapid freeze-thaw swings through winter and spring work mortar and brick loose, and the dry high-desert air pulls moisture out of masonry fast enough that small cracks widen season to season. Red Flag Warnings and drought conditions trigger seasonal burn bans across the metro, so fireplaces sit unused for long stretches and then get used hard. That pattern matters for creosote: the glaze builds during heavy use and hardens while the fireplace is idle. Scheduling the cleaning before the shoulder season, when homeowners actually start lighting up, catches it while it still brushes out. In Park Hill and Congress Park, the dry air and the number of uncapped original flues mean many first-time cleanings turn up bird nests and debris alongside the soot.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Denver Services
Two jobs bring most Denver homeowners to us: the annual sweep that keeps a fireplace safe to burn, and the dryer vent cleaning that handles the other vent in the house carrying lint and heat.
Chimney Sweep in Denver
A sweep here means more than running a brush. Our technicians check the flue for the freeze damage this climate causes – cracked tile, loose mortar joints, a crown that’s started to split – because soot is rarely the only thing a Denver chimney is holding. On pre-1940 masonry we work carefully around original brick; on factory-built metal fireplaces we use the method the manufacturer specifies. You get a camera inspection and photo report so you can see what we saw. For the full rundown, see Chimney Sweep in Denver.
Dryer Vent Cleaning in Denver
Lint packed into a dryer duct is a fire risk, and it’s one most homeowners never look at. Denver’s dry air doesn’t change that – the lint still accumulates, the duct still clogs, and the dryer still runs hotter as airflow drops. We clear the full run from the appliance to the exterior termination and check the outside damper while we’re there. It’s part of the same fire-safety work we do on chimneys, not a side offering. Details are on Dryer Vent Cleaning in Denver.
Chimney Repair in Denver
Chimney repair in Denver is mostly a story about age and weather working together. The original masonry chimneys in Congress Park and Park Hill have survived decades of freeze-thaw, and the metal fireplaces in the 80239 corridor are now old enough that their caps and flashing have started to fail. What the climate does above the roofline is the part most owners never see: water gets into a cracked crown or a lifted flashing edge, freezes, and quietly opens the seam wider. That’s why our Chimney Repair work starts with the top of the chimney and works down. We repair what we find, using professional-grade materials from Gelco and Copperfield, and the fix happens in the same visit as the inspection rather than waiting on a second appointment.
Chimney Crown Repair
Signs you need it
A crown that’s cracked, crumbling at the edge, or pulling away from the flue is the clearest sign, and in Denver it usually shows after a hard freeze.
What it costs in Denver
Crown repair typically falls in the $350 to $800 range, and a full crown rebuild runs higher, with the written estimate setting the final price.
How we do it
We clear the old crown material, shape a new sloped surface that sheds water away from the flue, and seal the joint where the crown meets the liner.
Chimney Cap Installation
Signs you need it
An open flue with no cap – common on older Park Hill and Congress Park homes – is a standing invitation to rain, birds, and debris.
What it costs in Denver
Cap installation typically runs $200 to $450 depending on the flue size and the cap style, with the written estimate setting the final price.
How we do it
We measure the flue, fit a cap sized to the opening, and secure it so it vents properly while keeping water and animals out.
What Chimney Repair Costs in Denver
| Item | Typical range in Denver |
|---|---|
| Chimney cap installation | $200 – $450 |
| Crown repair | $350 – $800 |
| Crown rebuild | $800 – $1,800 |
| Flashing repair | $250 – $600 |
| HeatShield liner resurfacing | $1,200 – $2,600 |
| DuraFlex liner installation | $2,000 – $4,500 |
Do I really need a new liner?
Not always. If the tile is cracked but the structure is sound, HeatShield resurfacing restores the flue from the inside without a full replacement. We show you the camera footage and let the condition of the liner decide, not a sales target.
How much does chimney repair cost in Denver?
Most Denver chimney repairs land between $200 and $800, with liner work running higher. Rapid freeze-thaw damage often pushes a small crown fix into a rebuild. Call (833) 749-6226 for an exact quote – estimates are free.
Brands We Service in Denver
We install and work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – not commodity hardware-store parts swapped in at the lowest price point. If a part has to be ordered, we tell you the turnaround up front. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Denver, CO
| Service | Typical range in Denver |
|---|---|
| Chimney sweep | $150 – $350 |
| Camera inspection with photo report | $100 – $250 |
| Chimney cap installation | $200 – $450 |
| Chimney cap replacement | $200 – $450 |
| Crown repair | $350 – $800 |
| Crown rebuild | $800 – $1,800 |
| Flashing repair | $250 – $600 |
| HeatShield liner resurfacing | $1,200 – $2,600 |
| DuraFlex liner installation | $2,000 – $4,500 |
| Dryer vent cleaning | $120 – $250 |
Two things push the price up in Denver: freeze damage that turns a simple crown patch into a rebuild, and the difference between a pre-1940 masonry flue and a factory-built metal fireplace, which take different parts and different labor. We give you a flat price agreed before we book, so the number you hear is the number on the estimate.
Neighborhoods We Serve in Denver
We work across the city, from the brick bungalows and Tudors of the core to the newer tract homes on the eastern corridors. The mix of housing means the crew arrives ready for either an original masonry chimney or a factory-built metal fireplace, and we book both into the same schedule. One response-time note for the whole city rather than a promise per neighborhood: we answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
- Park Hill
- Congress Park
- Washington Park
- Cherry Creek
- Montbello
Service Area – Cities Near Denver
Denver sits at the center of a metro where the same freeze-thaw cycles and burn-ban seasons apply, so the work just outside the city line looks a lot like the work inside it. We also cover the surrounding communities, including Commerce City, CO, Westminster, CO, Lakewood, CO, and Arvada, CO. If you’re not sure whether your address falls in our coverage, call and we’ll confirm before we book anything.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Denver
We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Booking ahead of the shoulder season when burn bans lift usually means a wider choice of times than calling the morning of a cold snap.
Some repairs, particularly structural masonry or a full reline, may require a permit from the city. We’ll tell you during the estimate whether your job needs one, so ask your local building department to confirm the specifics for your address.
Yes. We work across Denver and the surrounding cities, including Commerce City, Westminster, Lakewood, and Arvada. If your address is on the edge of the metro, call and we’ll confirm coverage before scheduling.
If your chimney hasn’t been looked at since the last burn season, or you’ve noticed a cracked crown, a loose cap, or a dryer that’s taking longer to dry a load, call (833) 749-6226 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience, and they repair what they find.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Denver Customers Say
"What sold me was that he told me what NOT to do. I was ready to spend a lot more than I needed to and he stopped me. Ended up costing about a third of what I'd budgeted."
- Lina Najjar"I'd use them again. Not the cheapest option in Highlands Ranch and the first appointment got pushed by a day, but the work was clean and they stood behind it."
- Todd Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Scott Walsh